Ti PRO Drysuit Hood With Zipper

As you descend the increasing pressure causes typical neoprene hoods to get thinner just as the deeper water is getting colder. 40% of heat loss is from the head area, it seems like this should be a place we adequately protect to keep us warm and comfortable.

So SEASOFT Ti PRO Hoods have compressed neoprene for the back panels of the hood. This means that no matter how deep you go, they are still working to keep you warm!

You will not find any seams down the middle of the chin either. This seam, found in almost all hoods today, causes jaw fatigue. The seam is there because it is cheaper to make hoods this way.

SEASOFT just doesn’t believe that a hood is the place to go cheap. SEASOFT Hoods are available in 3 mm and 6 mm wetsuit with bib, full face mask versions, and drysuit versions with and without a zipper.

The is the most comfortable and warmest drysuit hood available, Here’s why:

• The 3 back panels are compressed neoprene, your hood should not be getting thinner as you go deeper!

• Rugged #10 size zipper for those that desire this feature with a protective gusset behind the zipper.

• There are no seams in the middle of the chin to cause jaw fatique.

• SEASOFT uses 4 different types of neoprene to make this hood, others use one or two.

• There are two tiny holes in the top of the hood with a baffle system to allow air to purge.

• There is “skin in” on the neck to bind to your drysuit seal.

• High quality neoprene is used throughout on every hood.

• There are two layers of TITANIUM FLAKE FOIL™ to retain heat inside the hood.